About   Contact    |    


Faucet Knowledge

VIGA teaches you three tips for buying a faucet.

Shower faucets need to buy water-saving, high-quality shower faucets have a long service life, consumers buy shower faucets to buy water-saving. But how to choose, consumers may not know.

In this regard, some experts said that you should pay attention to the inspection report of the tap. According to the Beijing Consumers Association, many shower head products far exceed the requirements of national standards.

Water is the source of life. People’s life is inseparable from water. In modern society, it has long since departed from the era of digging wells. Therefore, the purchase of taps in house decoration is a top priority.

I have sorted out the notes below.

1 shower faucet to buy water saving

Some experts said that faucet flow is the basic technical indicator of water saving requirements. When consumers choose a water-saving faucet, they must check their test report and buy a shower with a filter and a filter. In addition, large showers are generally more expensive than small showers and shower heads.

2 The surface should be bright

It is understood that in this test, nearly one-third of the faucets have poor corrosion resistance.

Experts say that you should pay special attention to the corrosion resistance when purchasing. It is understood that many faucets in the process of production, the surface of the substrate has not been processed, the plating, the impurities left in the impact on the service life of the faucet; in addition, some faucet manufacturers in order to reduce costs, shorten the plating time The thickness of the coating is also reduced.

In this regard, some experts remind consumers that in the case of sufficient light, the surface of the faucet should be black as mirror, without any oxidized spots or burnt marks; in addition, the faucet should be free of pores, no blistering, no leakage plating, and color. Uniform; touch no burrs, sand particles by hand; used to press the surface of the faucet, the fingerprint should spread quickly, and it is not easy to adhere to scale.

3 connection nut should be copper

Some consumers may have encountered this situation, the shower does not see any problems on the outside, only to find that the connection nut is easy to break. In this regard, consumers must pay attention to observe the wall thickness of the connecting nut.

Experts said that the quality of the shower connector nut is very good in the process of home decoration. The connection nut that does not meet the national standard is easy to break, and the responsibility is difficult to define.

It is reported that the main reason for the shower faucet connection nut not meeting the national standard is that the connecting nut has insufficient wall thickness or is replaced by non-copper material. Therefore, consumers must choose copper nuts. In addition, the shower accessories purchased by consumers should also be made of copper. Do not buy cheap plastic parts at a time.

VIGA teaches you three tips for buying a faucet. - Faucet Knowledge - 1



Live Chat
Leave a message